ZyXEL 793H 用户指南
Chapter 38 Troubleshooting
P-793H User’s Guide
354
38.2 ZyXEL Device Access and Login
V
I forgot the IP address for the ZyXEL Device.
1 The default IP address is 192.168.1.1.
2 Use the console port to log in to the ZyXEL Device.
3 If you changed the IP address and have forgotten it, you might get the IP address of the
2 Use the console port to log in to the ZyXEL Device.
3 If you changed the IP address and have forgotten it, you might get the IP address of the
ZyXEL Device by looking up the IP address of the default gateway for your computer.
To do this in most Windows computers, click Start > Run, enter cmd, and then enter
ipconfig. The IP address of the Default Gateway might be the IP address of the ZyXEL
Device (it depends on the network), so enter this IP address in your Internet browser.
To do this in most Windows computers, click Start > Run, enter cmd, and then enter
ipconfig. The IP address of the Default Gateway might be the IP address of the ZyXEL
Device (it depends on the network), so enter this IP address in your Internet browser.
4 If this does not work, you have to reset the device to its factory defaults. See
.
V
I forgot the password.
1 The default password is 1234.
2 If this does not work, you have to reset the device to its factory defaults. See
2 If this does not work, you have to reset the device to its factory defaults. See
.
V
I cannot see or access the Login screen in the web configurator.
1 Make sure you are using the correct IP address.
• The default IP address is
192.168.1.1
.
• If you changed the IP address (
), use the new IP address.
• If you changed the IP address and have forgotten it, see the troubleshooting
suggestions for
2 Check the hardware connections, and make sure the LEDs are behaving as expected. See
the Quick Start Guide and
3 Make sure your Internet browser does not block pop-up windows and has JavaScripts
4 Make sure your computer is in the same subnet as the ZyXEL Device. (If you know that
there are routers between your computer and the ZyXEL Device, skip this step.)
• If there is a DHCP server on your network, make sure your computer is using a
• If there is a DHCP server on your network, make sure your computer is using a
dynamic IP address. See
. Your ZyXEL Device is a DHCP
server by default.
5 Reset the device to its factory defaults, and try to access the ZyXEL Device with the
default IP address. See
.