Aethra d2001 nx 用户手册
USER’S MANUAL
ISDN TESTER AND ANALYZER D2001
NX
L3 (bearer services): Setup AUTOMATIC to enable automatic test of the bearer and
teleservices capability of the access (Speech, Data, Fax Gr.4,…), or choose the
service to test
teleservices capability of the access (Speech, Data, Fax Gr.4,…), or choose the
service to test
Supplementary services: Choose AUTOMATIC to enable automatic test of the
supplementary services available on the access (CLIP, DDI, CF, …), or choose the
service to test
supplementary services available on the access (CLIP, DDI, CF, …), or choose the
service to test
B channel check: Choose AUTOMATIC to enable automatic test of the B channels
availability, or choose the channel to test
availability, or choose the channel to test
2.3.2. Running an automatic access test
When you have defined the setup for the automatic test, continue as follows:
1
Select ‘Use this setup for testing’ in the first SETUP page.
2
Connect the instrument as displayed on the screen and
press the right cursor key.
press the right cursor key.
3
Start the automatic test. The test results appear on the
screen.
screen.
Note that:
The START key changes to STOP. Use it to stop the test.
To obtain the access configuration, the instrument places a series of calls to the
entered number, changing the profile and the B channel every time, and tries to verify
the supplementary services.
entered number, changing the profile and the B channel every time, and tries to verify
the supplementary services.
Following, are some examples of a full sequence test “RESULT: ACCESS TEST”
screens:
screens:
CHAPTER 2 - PERFORMING AN AUTOMATIC TEST
27