ETen p300b 快速安装指南
11
Screen Alignment
When you use this Pocket PC for the first time or cold-boot it, system
will require you to do screen alignment. When the Pocket PC doesn’t respond
properly to screen taps, you can also redo screen positioning by following the
instructions in this section.
properly to screen taps, you can also redo screen positioning by following the
instructions in this section.
1. Tap on
and then Settings. On the
System tab, tap Screen to align the
screen.
2. Tap on the “Align Screen” button.
When the screen adjustment window
appears, use stylus to tap the center of
the cross (+) until the next cross
appears. Please follow the instructions
on screen to finish the rest of the
operations. Tap “ok” button to exit.
appears, use stylus to tap the center of
the cross (+) until the next cross
appears. Please follow the instructions
on screen to finish the rest of the
operations. Tap “ok” button to exit.
Turn on Screen
This product is designed to provide you with power-save functions.
When the screen is off, you can turn the screen back on by pressing the
“Power” button on the left side of the Pocket PC.
“Power” button on the left side of the Pocket PC.
Power On and Off
Sleep Mode
1. Press the “Power” button on the left side of the Pocket PC to enter Sleep
mode. During the Sleep mode, screen is off and some peripherals will
enter power-save mode. But if the cell phone is already turned on, it will
remain on stand-by status.
enter power-save mode. But if the cell phone is already turned on, it will
remain on stand-by status.
2. Press the “Power” button again to turn the screen back on.
You can also tap on
and then Settings. On the System tab, tap
Power and then Advance tab to configure “automatically turn off the
device” when the Pocket PC is in stand-by for a certain duration.
device” when the Pocket PC is in stand-by for a certain duration.