ETen p300b 快速安装指南
9
4. Plug the AC adapter’s (specifically for this product) round connector into
the power jack located in the back of the charging cradle. Then plug the
other end of the AC adapter into a normal home-use wall outlet. The
Pocket PC will then start charging automatically.
other end of the AC adapter into a normal home-use wall outlet. The
Pocket PC will then start charging automatically.
5. Cold Boot: Use one finger to press and hold the “Power” button on the top
of the Pocket PC, meanwhile, use the tip of the stylus to press down the
“Reset” button located on the left side of the Pocket PC. Then release the
“Power” button and the “Reset” button simultaneously. After rebooting,
follow the instructions on the screen to finish screen alignment…etc, tasks.
“Reset” button located on the left side of the Pocket PC. Then release the
“Power” button and the “Reset” button simultaneously. After rebooting,
follow the instructions on the screen to finish screen alignment…etc, tasks.
6. A brand new Pocket PC takes approximately 8 hours to be fully charged. It
takes about 3 hours to be charged in full thereafter. After charging is
finished, you can then unplug the AC adapter and carry around the Pocket
PC freely. Please charge the Pocket PC regularity in the future to keep the
Pocket PC functioning smoothly.
finished, you can then unplug the AC adapter and carry around the Pocket
PC freely. Please charge the Pocket PC regularity in the future to keep the
Pocket PC functioning smoothly.
7. “Indicator on the top left of this Pocket PC” will indicate charging or
various other functions in-use.
Charging
Charging is Finished
Low Power
Red light glows
Red light off
Red light blinks
Cell phone on
Reminder or warning
Green light blinks Orange light blinks quickly
If secondary main battery is purchased, it can be charged by plugging in
the charging slot located on the back of the charging cradle. “Indicator on
the side of the charging cradle” will indicate the charging status.
the side of the charging cradle” will indicate the charging status.
Charging
Charging is Finished
No Battery
Red light glows
Green light glows
Indicator off
Replacing Battery
1. If cell phone or GPRS connecting fuction has been turned on, you should
turn them off first before going on to the next step. Otherwise, the
connection will be shut down improperly.
connection will be shut down improperly.
2. Unlock the main battery lock located on the back of this Pocket PC and
take out the battery.
3. Replace the main battery and lock the main battery lock. When the main
battery is taken out, system power will be supplied temporarily by back-up
battery. However, if you do not install the main battery back within 1
minute, data will be lost.
battery. However, if you do not install the main battery back within 1
minute, data will be lost.
4. Remember to press the “Power” button to turn on the screen.
Otherwise, the Pocket PC will be supplied by the back-up battery
continuously and data may lose when the back-up battery is
exhausted.
continuously and data may lose when the back-up battery is
exhausted.