Hitachi BZ-1 用户指南

44

INPUT menu

The resolution for the COMPUTER IN1 and COMPUTER IN2 input 
signals can be set on this projector.
(1)  In the INPUT menu select the RESOLUTION using the ▲/▼ 

buttons and press the ► button. 
The RESOLUTION menu will be  
displayed.

(2)  In the RESOLUTION menu select the 

resolution you wish to display using 
the ▲/▼ buttons.  
Selecting AUTO will set a resolution 
appropriate to the input signal.

(3)  Pressing the ► or ENTER button when 

selecting a STANDARD resolution will 
automatically adjust the horizontal and 
vertical positions, clock phase and 
horizontal size.

The INPUT_INFORMATION dialog will be 
displayed.

(4)  To set a custom resolution use the ▲/▼ buttons to select 

the CUSTOM and the RESOLUTION_CUSTOM box will be 
displayed. 

Set the horizontal (HORZ) and 
vertical (VERT) resolutions using 
the ▲/▼/◄/► buttons. 
This function may not support all 
resolutions.

(5)  Move the cursor to OK on screen and press the ► or ENTER 

button. The message "ARE YOU SURE YOU WISH TO 
CHANGE RESOLUTION?" appears. To save the setting, press 
the ► button.  
The horizontal and vertical positions, clock phase and horizontal 
size will be automatically adjusted.

The INPUT_INFORMATION dialog 
will be displayed.

(6)  To revert back to the previous resolution without saving changes, 

move the cursor to CANCEL on screen and press the ◄ or 
ENTER button. 
The screen will then return to the RESOLUTION menu 
displaying the previous resolution.

• For some pictures, this function may not work well.

STANDARD  

↓

CUSTOM 

↓