Clavia lead 2x 用户指南

3. If you want the connected pedal to duplicate the functionality of the M

, press 

the D

 button until the D

 reads ‘E.oF’).

With this setting, the expression pedal will have the same function as the M

.

4. If you instead want to select an independent control function for the pedal, press the S

 button. 

The D

 will flash, showing one of the abbreviations in the table below.

5. Use the U

 buttons to select one of the following control functions:

6. After you have made your choice, press S

 again. You will return to the ‘E’ display. 

7. Use the U

 buttons to select a control amount value (‘1’ to ‘7’). This value (shown to the 

right in the D

) determines the range of the pedal control signal. Lower values give a smaller 

difference between the pedal’s “full up” and “full down” states. High values give a greater difference 
between the pedal’s up and down states.

8. If needed, repeat steps 5 to 10 to set pedal control function for the other slots.

9. Press S

 to exit the Special menu and return to play mode.

Nord Lead 2X will also recognize Expression pedal messages via MIDI as MIDI Controller #11.

LFO 1 Amount.

LFO 2 Amount.

Filter Cutoff Frequency.

FM Amount.

Oscillator 2 Pitch.