LXE hx3 参考指南
Barcode Tab
145
E-EQ-HX3RG-C
HX3 Reference Guide
Continuous Scan Mode
Note:
If the Continuous Scan options are not available, an OS update is needed to enable this
feature. Please contact your LXE representative for details.
feature. Please contact your LXE representative for details.
Enabling Continuous Scan ensures the laser is always on and decoding.
Caution
Laser beam is emitted continuously. Do not look or stare into the laser beam.
To enable continuous scanning, check the Continuous Scan Mode checkbox.
When the scanner is in continuous mode, the trigger functions as a scanner on/off switch.
The scanner red LED is always off in continuous mode. The audio beeps and green LED work
the same as they do for normal trigger mode.
the same as they do for normal trigger mode.
Switching between normal and continuous modes is in effect upon clicking the Ok button though
there may be a small delay as the scanner initializes. A warmboot is not necessary after this
change.
there may be a small delay as the scanner initializes. A warmboot is not necessary after this
change.
Use Timeout between same symbol to control the timeout period between scans of the same
symbol. For example, if the delay is set to one second and a barcode is scanned, that same
barcode cannot be scanned again until the aim beam has been shifted away from that barcode for
a minimum of 1 second. When the delay is set to 0.0, the scanner scans the same barcode
continuously as long as the aim beam is focused on that barcode. The value ranges from 0.0 to
9.9 seconds with a default of 1.0 seconds.
symbol. For example, if the delay is set to one second and a barcode is scanned, that same
barcode cannot be scanned again until the aim beam has been shifted away from that barcode for
a minimum of 1 second. When the delay is set to 0.0, the scanner scans the same barcode
continuously as long as the aim beam is focused on that barcode. The value ranges from 0.0 to
9.9 seconds with a default of 1.0 seconds.