LXE hx3 参考指南
Summit Client Configuration
185
E-EQ-HX3RG-C
HX3 Reference Guide
EAP-FAST Authentication
Start the Summit Utility by tapping the Summit Client icon.
Tap the Admin Login button on the Main panel. Enter the Administrator password and tap OK.
Tap the Config or Profile tab.
Figure 5-15 Configure a Summit Profile for EAP-FAST
Enter the SSID of the Access Point assigned to this profile.
Set Auth Type to Open.
Set EAP Type to EAP-FAST.
Set Encryption to WPA TKIP.
Tap the Credentials button.
The SCU supports EAP-FAST with automatic or manual PAC provisioning. With automatic PAC
provisioning, the user credentials are sent to the RADIUS server.
provisioning, the user credentials are sent to the RADIUS server.
The RADIUS server must have auto provisioning enabled to send the PAC provisioning
credentials to the client device. Please refer to the LXE Security Primer for more information on
the RADIUS server configuration.
credentials to the client device. Please refer to the LXE Security Primer for more information on
the RADIUS server configuration.