LXE hx3 参考指南
14
Components
HX3 Reference Guide
E-EQ-HX3RG-C
Li-Ion Battery
Note:
The HX3 uses the same batteries, charger and cradle as the LXE HX2.
Main battery charging is handled exclusively by the HX2 Multi-Charger/analyzer and the battery
charger integrated into a powered cradle.
charger integrated into a powered cradle.
The Standard battery is much thinner than the Extended battery.
Each battery will fit in the battery sleeve on the hip flip and the voice case.
Note:
Do not allow water or chemical cleaning agents of any kind to come in contact with the
battery charging contacts or the battery cable connector; they may be damaged. If
necessary, clean them with a soft-bristle, dry brush or compressed air.
battery charging contacts or the battery cable connector; they may be damaged. If
necessary, clean them with a soft-bristle, dry brush or compressed air.
Battery Charge/Connect
Terminals
HX3 Battery Cable
Connector
Note:
When placing the tethered battery in a hip flip or voice case battery sleeve, ensure the
Battery Charge/Connect terminals are protected from accidental damage by keeping
them covered by the sleeve fabric at all times.
Battery Charge/Connect terminals are protected from accidental damage by keeping
them covered by the sleeve fabric at all times.
Note:
New batteries must be charged prior to use. The backup battery is continually recharged
by the tethered battery.
by the tethered battery.
Standard Battery
Figure 1-13 Standard Battery
Extended Battery
Figure 1-14 Extended Battery