LXE hx3 参考指南
Components
15
E-EQ-HX3RG-C
HX3 Reference Guide
Mounting Bracket Clips
Mounting brackets are pre-installed to the back of the HX3. The brackets (one on each side)
secure the HX3 to the mounting bracket clips on a hip flip.
secure the HX3 to the mounting bracket clips on a hip flip.
Figure 1-15 Mounting Brackets
The HX3 mount assembly is pre-installed to a hip flip.
Figure 1-16 Hip Flip Mount Assembly and Clips
Connect
Center the HX3 over the mount assembly and gently push down until both bracket clips (indicated
by the arrows shown above) snap over the brackets on the HX3. Carefully test the connection to
make sure the HX3 is secured to the hip flip.
by the arrows shown above) snap over the brackets on the HX3. Carefully test the connection to
make sure the HX3 is secured to the hip flip.
Reset the connection by pressing down on either mounting clip to release the HX3 and try again.
Disconnect
Remove the HX3 from the mount assembly by pushing down on either mounting clip, or both,
until the HX3 mounting bracket disconnects.
until the HX3 mounting bracket disconnects.
Or you can disconnect from one clip, then lift the HX3 up at a 45 degree angle until the other side
disconnects. Lift the HX3 up and away from the mount assembly.
disconnects. Lift the HX3 up and away from the mount assembly.