LXE hx3 参考指南
Bluetooth
27
E-EQ-HX3RG-C
HX3 Reference Guide
Initial Use
1. Select Start | Settings | Control Panel | Bluetooth.
2. Tap the Settings Tab.
3. Change the Computer Friendly Name at the bottom of the Settings display. The Bluetooth
HX3 default name is determined by the LXE factory installed software version. LXE strongly
urges assigning every HX3 a unique name (up to 32 characters) before Bluetooth Discovery
is initiated.
urges assigning every HX3 a unique name (up to 32 characters) before Bluetooth Discovery
is initiated.
4. Check or uncheck the HX3 Bluetooth options on the Settings tab.
5. Tap the OK button to save your changes or the X button to discard any changes.
Settings Tab | Bluetooth Options
Note: These options can still be checked or unchecked whether Bluetooth is enabled or
disabled.
As Bluetooth devices pair with the HX3, the name of the device and an icon representing the type
of device is displayed in the Devices window. The icon state changes as the paired Bluetooth
devices connect and disconnect from the HX3. When the Bluetooth devices are disconnected, the
device icon has a red highlight.
of device is displayed in the Devices window. The icon state changes as the paired Bluetooth
devices connect and disconnect from the HX3. When the Bluetooth devices are disconnected, the
device icon has a red highlight.
Note:
Due to the headless design of the HX3, all Bluetooth dialog pop-up boxes are suppressed
by default, even when the HX3 desktop is viewed with LXEConnect. The dialog pop-ups
may be enabled for viewing with a remote management tool such as LXEConnect.
However the dialog pop-ups should be turned off when the HX3 is not being viewed with
a remote management utility to preserve battery life.
by default, even when the HX3 desktop is viewed with LXEConnect. The dialog pop-ups
may be enabled for viewing with a remote management tool such as LXEConnect.
However the dialog pop-ups should be turned off when the HX3 is not being viewed with
a remote management utility to preserve battery life.
Report when connection lost
A dialog box appears on the HX3 display notifying the user the connection between one (or all) of
the paired Bluetooth devices has stopped. This option is disabled by default.
the paired Bluetooth devices has stopped. This option is disabled by default.
Click the OK button or the X button to remove the dialog box from the screen.
Report when reconnected
A dialog box appears on the HX3 display notifying the user a connection between one (or all) of
the previously-paired Bluetooth devices is complete. This option is disabled by default.
the previously-paired Bluetooth devices is complete. This option is disabled by default.
Click the OK button or the X button to remove the dialog box from the screen.
Report failure to reconnect
If the reconnect timeout (30 minutes) expires, a dialog box appears on the HX3 display notifying
the end-user the connection between one (or all) of the previously-paired Bluetooth devices has
failed. This option is disabled by default.
the end-user the connection between one (or all) of the previously-paired Bluetooth devices has
failed. This option is disabled by default.
Click the OK button to remove the dialog box from the screen.
Computer is connectable
There is no dialog connected to this checkbox. Enable this checkbox when you want the HX3 to
be able to pair with other Bluetooth devices. This option is enabled by default.
be able to pair with other Bluetooth devices. This option is enabled by default.