LXE hx3 参考指南
54
Batteries
HX3 Reference Guide
E-EQ-HX3RG-C
Note:
Placing the HX3 in suspend terminates the ActiveSync connection, if one is established.
The ActiveSync connection must be re-established after the HX3 exits suspend.
The ActiveSync connection must be re-established after the HX3 exits suspend.
Backup Battery
Viewing the backup battery status or performing backup battery maintenance
requires an ActiveSync connection and LXEConnect. Please see “ActiveSync and
the HX3” in Chapter 3 System Configuration for details on establishing this
connection.
requires an ActiveSync connection and LXEConnect. Please see “ActiveSync and
the HX3” in Chapter 3 System Configuration for details on establishing this
connection.
The HX3 has a backup battery that is designed to provide limited-duration electrical power in the
event of main battery failure. The backup battery is a 50 mAh Nickel Cadmium (NiCd) battery
that is factory installed in the unit. The energy needed to maintain the backup battery near full
charge at all times comes from the HX3 main battery.
event of main battery failure. The backup battery is a 50 mAh Nickel Cadmium (NiCd) battery
that is factory installed in the unit. The energy needed to maintain the backup battery near full
charge at all times comes from the HX3 main battery.
It takes several hours of operation before the backup battery is capable of supporting the operation
of the mobile device. The duration of backup battery life is dependent upon operation of the HX3,
its features and any operating applications.
of the mobile device. The duration of backup battery life is dependent upon operation of the HX3,
its features and any operating applications.
The backup battery has a minimum service life of two years. The backup battery is replaced by
LXE.
LXE.
The backup battery can be discharged, recharged and conditioned using a CE Control Panel
applet. Tap
applet. Tap
| Settings | Control Panel | Battery then tap the Discharge button.
Handling Batteries Safely
• Never dispose of a battery in a fire. This may cause an explosion.
• Do not replace individual cells in a battery pack.
• Do not attempt to pry open the battery pack shell.
• Be careful when handling any battery. If a battery is broken or shows signs of
• Do not replace individual cells in a battery pack.
• Do not attempt to pry open the battery pack shell.
• Be careful when handling any battery. If a battery is broken or shows signs of
leakage do not attempt to charge it. Dispose of it using proper procedures.
Caution
Nickel-based cells contain a chemical solution which burns skin, eyes, etc. Leakage
from cells is the only possible way for such exposure to occur. In this event, rinse
the affected area thoroughly with water. If the solution contacts the eyes, get
immediate medical attention.
from cells is the only possible way for such exposure to occur. In this event, rinse
the affected area thoroughly with water. If the solution contacts the eyes, get
immediate medical attention.
NiCd and Li-Ion batteries are capable of delivering high currents when accidentally
shorted. Accidental shorting can occur when contact is made with jewelry, metal
surfaces, conductive tools, etc., making the objects very hot. Never place a battery
in a pocket or case with keys, coins, or other metal objects.
shorted. Accidental shorting can occur when contact is made with jewelry, metal
surfaces, conductive tools, etc., making the objects very hot. Never place a battery
in a pocket or case with keys, coins, or other metal objects.