LXE vx7 参考指南
Clearing Persistent Storage
143
E-EQ-VX7RG-H
VX7 Reference Guide
Clearing Persistent Storage
The coldboot utility sets all registry settings back to LXE factory defaults. No other clearing is
available or necessary.
available or necessary.
Keyboard Backlighting
This VX7 keyboards illuminate the individual keys
60-Key Keyboard
The keyboard is manually controlled by pressing <2
nd
> + <CTRL> + <F10> when using the 60-
key keyboard. This key sequence immediately changes the state of the keyboard backlight as
follows:
follows:
• Turns the backlight Off if it is currently On.
• Turns the backlight On if it is currently Off.
• Turns the backlight On if it is currently Off.
95-Key Keyboard
The keyboard backlight is manually controlled using the “backlight” key in the upper
right hand corner of the keyboard. Pressing the backlight key cycles the keyboard
backlight through the levels of backlight intensity:
right hand corner of the keyboard. Pressing the backlight key cycles the keyboard
backlight through the levels of backlight intensity:
• Off
• Maximum intensity
• Medium intensity
• Low intensity.
• Maximum intensity
• Medium intensity
• Low intensity.
Network Configuration
There are two networking options available for the VX7:
• Wireless radios
• Ethernet (RJ-45) connector.
• Ethernet (RJ-45) connector.
Wireless Radios
Please refer to the appropriate section in Chapter 5, “Wireless Network Configuration” for
configuring the Summit, Cisco or Symbol radio.
configuring the Summit, Cisco or Symbol radio.
Ethernet Connector
When the VX7 is networked using the Ethernet connector, the VX7’s networking options are set
via the Microsoft Windows CE Control Panel.
via the Microsoft Windows CE Control Panel.
For more information on configuring the Microsoft Windows CE network
settings, please refer to the Help feature or commercially available Windows CE
networking literature.
settings, please refer to the Help feature or commercially available Windows CE
networking literature.