Ricoh 240w 用户指南
DRAFT 2003/11/12
Basics
16
1
Placing Originals
Note
❒ Place the original after any correc-
tion fluid or ink has completely
dried. Not taking this precaution
will result in a dirtied exposure
glass and blemished copies.
dried. Not taking this precaution
will result in a dirtied exposure
glass and blemished copies.
❒ Dust and residue from pencil-
drawn originals can result in a
dirtied exposure glass and blem-
ished copies. We recommend us-
ing the carrier sheet for this type of
original. See p.17 “Setting the Car-
rier Sheet”.
dirtied exposure glass and blem-
ished copies. We recommend us-
ing the carrier sheet for this type of
original. See p.17 “Setting the Car-
rier Sheet”.
❒ If the original's rear edge is badly
curled, smooth it out with both
hands before scanning. If the origi-
nal is inserted as is, it may be dam-
aged.
hands before scanning. If the origi-
nal is inserted as is, it may be dam-
aged.
❒ When copying curled originals,
use the lower output auxiliary
guide.
guide.
AAAA
Make sure “Set Original” lights
on the control panel.
on the control panel.
BBBB
Adjust the original guides to the
size and orientation of the origi-
nal width.
size and orientation of the origi-
nal width.
Note
❒ Do not push the original guide
side fence with force.
CCCC
Using both hands, carefully insert
the original between the original
guides, copy side down.
the original between the original
guides, copy side down.
Important
❒ Once originals start to feed in,
do not push or pull them. This
may damage them.
may damage them.
❒ After inserting an original, do
not try to handle it. Support it, if
necessary, so as not to interrupt
feeding.
necessary, so as not to interrupt
feeding.
ABB541S
AAJ506S
AAJ507S