Ricoh 240w 用户指南
DRAFT 2003/11/12
Basics
18
1
Note
❒ Align the original with the fold
of the carrier sheet.
BBBB
Using both hands, hold the origi-
nal copy side down, and carefully
insert the folded edge of the carri-
er sheet into the insertion area.
nal copy side down, and carefully
insert the folded edge of the carri-
er sheet into the insertion area.
Setting Folded Originals (the
Original Switching Lever)
Original Switching Lever)
When setting folded originals such as
drawings, you can make copies with
the fold lines erased.
drawings, you can make copies with
the fold lines erased.
Limitation
❒ Originals thicker than 157 g/m
2
(41.8 lb.) cannot be used.
AAAA
Move the original switching le-
vers at both sides of the machine
to the front.
vers at both sides of the machine
to the front.
Setting Rolled Originals
When setting rolled originals, you
can make copies using the lower out-
put auxiliary guide.
can make copies using the lower out-
put auxiliary guide.
AAAA
Pull the lower output auxiliary
guide out and forward.
guide out and forward.
BBBB
Place the rolled original on the
lower output auxiliary guide.
lower output auxiliary guide.
CCCC
Pull the leading edge of the origi-
nal up to the original table, and
then adjust the original guides to
the paper width.
nal up to the original table, and
then adjust the original guides to
the paper width.
DDDD
Using both hands, carefully insert
the original between the original
guides, copy side to down.
the original between the original
guides, copy side to down.
Note
❒ Do not apply excessive force to
the lower ou tput auxiliary
guide.
guide.
ABB534S
AAJ539S
AAJ537S
AAJ538S