Ricoh 480W 参考指南
JOB
EDITOR
• Mirror:
In this area you can set whether the drawing is to be
mirrored or not during plotting. The individual fields mean
the following:
the following:
OFF: The drawing is not mirrored during plotting.
X:
The drawing is mirrored horizontally.
Y:
The drawing is mirrored vertically.
XY: The drawing is mirrored about both axes
simultaneously; equates to a 180° rotation.
You usually use these settings if the drawing has been
scanned and saved with a mirror inversion. This is especially
important if a translucent medium has been scanned with
mirror inversion to increase the contrast.
important if a translucent medium has been scanned with
mirror inversion to increase the contrast.
"Entry" settings area
You can read here, which adjustments can be made for an
individual entry.
To begin altering the settings of an entry you must mark it in the
left-hand entry list. The "Specific" and "Additional" tabs are then
opened and can be edited. If you want to change back to the
job settings or defaults, click once on the "Job" or "Defaults"
individual entry.
To begin altering the settings of an entry you must mark it in the
left-hand entry list. The "Specific" and "Additional" tabs are then
opened and can be edited. If you want to change back to the
job settings or defaults, click once on the "Job" or "Defaults"
RW-480 PLOTBASE 104