Ricoh 480W 参考指南
PRINT
JOB
• Quit Autoplot mode:
The Autoplot mode is used for automatic processing of the
print jobs. If you want to interrupt the printing process for
longer, for example to check the settings of the print jobs or
print jobs. If you want to interrupt the printing process for
longer, for example to check the settings of the print jobs or
to change a roll, deactivate the Autoplot mode by clicking on
the "Auto" button in the signal lights. It looks like this when it
is deactivated:
the "Auto" button in the signal lights. It looks like this when it
is deactivated:
The print job which has already begun is completed. The
printing process is then stopped. You can now make any
necessary changes to the other jobs.
printing process is then stopped. You can now make any
necessary changes to the other jobs.
• Cancel creation:
If an individual job only is to be terminated, select the
command "Job – Cancel job".
command "Job – Cancel job".
Delete job
Use one of the following four methods if you want to delete a
job from the list:
job from the list:
-
Mark the job in the job list that you want to delete and select
the menu item "Job - Delete".
the menu item "Job - Delete".
-
Mark the job in the job list that you want to delete and click
on the following button:
on the following button:
-
Mark the job to be deleted with the mouse, click on the right-
hand mouse button and select "Delete".
-
The fourth possible method is to leave all the jobs in the job
list and to update the job list automatically using your History
setting in the configuration program. There you can set the
maximum number of jobs to be included in the list. The
list and to update the job list automatically using your History
setting in the configuration program. There you can set the
maximum number of jobs to be included in the list. The
oldest jobs are deleted.
RW-480 PLOTBASE 137