Ricoh 480W 参考指南
SETTINGS
BEFORE
INSTALLATION
Activate LPR service
This setting is also necessary if you use the RW-480
PLOTCLIENT MAC. You must adjust the following settings to
use the PLR service:
PLOTCLIENT MAC. You must adjust the following settings to
use the PLR service:
1. Open the window "Windows components" in "Start - Control
Panel - Add/Remove Programs - Add/Remove Windows
components" [XP] / "Start - Settings - Control Panel -
Add/Remove Programs - Add/Remove Windows
components" [XP] / "Start - Settings - Control Panel -
Add/Remove Programs - Add/Remove Windows
components" [2000].
2. Activate the option "Other Network File and Print Services".
3. Click on "Next" and follow the instructions in the next
3. Click on "Next" and follow the instructions in the next
windows.
Setting the start type
Once you have activated all the necessary services, now adjust
the setting so that the "TCP/IP print server" and the "FTP
publishing" automatically start up when the computer starts:
1. Open the window "Services" in "Start – System control –
publishing" automatically start up when the computer starts:
1. Open the window "Services" in "Start – System control –
Management - Services" [XP] / "Start – Settings – System
control – Management - Services" [2000].
control – Management - Services" [2000].
2. Double click on the window "TCP/IP print server". In this
window, adjust the option "Automatic" under "Start type",
and enter "OK" to conclude.
and enter "OK" to conclude.
3. Double click on the window "FTP Publishing". In this window,
adjust the option "Automatic" under "Start type", and enter
"OK" to conclude .
"OK" to conclude .
4. Close all windows.
RW-480 PLOTBASE 24