Ricoh 480W 参考指南

 INSTALLATION 

OF THE PROGRAMS

 

The setup described here is used for the following installations: 

 

Driver software for the controller board 

 

RW-480 PLOTBASE 

 

RW-480 SCANTOOL 

 

RW-480 WINPRINT 

 

"Tools" directory for the RW-480 clients 

 

Microsoft .NET Framework 

 

LibCAD 2005 

 

Adjustment of the Windows Firewall 

The installation steps are the same for operating systems 
Windows XP Professional and Windows 2000 Professional. 
Installation of the PLOTCLIENTS is described in the manual 

"RW-480 CLIENTS". 

Note: If you also want to use an AutoCAD on the 

server PC intended for RW-480 PLOTBASE, please 

install the AutoCAD before the RW-480 system so that 
the RW-480 installation can automatically adopt the 
required configuration for cooperation with AutoCAD. 

Attention: Never start the files "setup.exe" and "set-

uplauncherru.exe" with the context menu function 
"execute as"! 

Proceed with installation as follows: 

1.  Fit the supplied controller board in your computer, then start 

Microsoft Windows 2000 or Windows XP as user with 
administrator rights. 
Windows tells you automatically that new hardware has been 
found, and starts an installation wizard. 

2.  Answer the questions from the installation wizard with "No, 

not yet", then click on "Next". 

3.  Insert the supplied RW-480 CD.  

 

RW-480 PLOTBASE    25