Ricoh 480W 网络指南

Remote Maintenance by telnet

47

Use the "dhcp" command to config-
ure DHCP settings.

❖

❖

❖

❖ View settings

The following command displays
the current DHCP settings.

❖

❖

❖

❖ Configuration

You can configure DHCP.

• Click {on} to enable dhcp. Click

{off} to disable DHCP.

• If the DNS server address and

domain name are obtained from
DHCP, be sure to click {on}.

• ip1394 can be specified only

when the IEEE 1394 interface is
installed.

• wlan can be specified only

when the IEEE 802.11b interface
is installed.

❖

❖

❖

❖  Current interface priority configura-

❖

❖

❖

❖ Interface priority configuration

• You can select which interface

has DHCP parameter priority.

• Priority settings are available

when multiple interfaces are in-
stalled.

❖

❖

❖

❖ DNS server address selection

• Specify whether to obtain the

DNS server address from the
DHCP server or use the address
set by a user. 

• To obtain the DNS server address

from the DHCP server, specify
"dhcp". To use the address set by
a user, specify "static". 

❖

❖

❖

❖ Domain name selection

• Specify whether to obtain the

domain  name  from  the  DNS
server or use the domain name
set by a user.

• To obtain the domain name from

the DHCP server, specify "dhcp".
To use the domain name set by a
user, specify "static". 

 For details about DHCP functions,
see p.67 “Using DHCP”.
 For details about setting the DNS
server address, see p.47 “dns”.
For details about setting the do-
main name, see p.49 “domain-
name”.

Use the “dns” command to configure
or display DNS (Domain Name Sys-
tem) settings.

❖

❖

❖

❖ View settings

The following command displays
current DNS settings:

ether

Ethernet interface

ip1394

IEEE 1394 interface

wlan

IEEE 802.11b interface