Ricoh ap1400 用户手册
Paper and Other Media
84
9
er. Then slide it inside until it
stops.
stops.
Type 1 Printer: Loading
Envelopes
Envelopes
As there are so many kinds of enve-
lopes, be sure to check if those to be
used are supported by this printer.
lopes, be sure to check if those to be
used are supported by this printer.
Important
❒ Even when the optional envelope
feeder is not installed, you can
specify the sizes for the envelopes
for Tray 2 using the operation pan-
el. However, make sure that the
envelopes are not loaded into the
tray without the envelope feeder.
specify the sizes for the envelopes
for Tray 2 using the operation pan-
el. However, make sure that the
envelopes are not loaded into the
tray without the envelope feeder.
❒ To install the envelope feeder, the
installation of the optional paper
unit is required.
unit is required.
Reference
For more information on the enve-
lopes, see P.74 “Paper types and cau-
tions”.
lopes, see P.74 “Paper types and cau-
tions”.
Type 1 printer: loading envelopes onto
the bypass tray
the bypass tray
Note
❒ Please refer to the inside of the
front cover of this manual to con-
firm which printer (Type 1 Printer
or Type 2 Printer) you have.
or Type 2 Printer) you have.
Important
❒ With the bypass tray, you can load
up to 10 envelopes at a time. For
more information on envelopes,
see P.74 “Paper types and cautions” .
more information on envelopes,
see P.74 “Paper types and cautions” .
A
Open the bypass tray.
B
Slide the side guides. Slide out
the bypass tray extender and flip
it open.
the bypass tray extender and flip
it open.
C
Load envelopes until it stops,
with the print side down and the
with the print side down and the
TS3Y190E
TS3Y110E
TS3Y131E