Ricoh ap1400 用户手册
Type 1 Printer: Loading Paper and Other Media
85
9
sides of the flaps on the right as
shown in the illustration.
shown in the illustration.
Important
❒ Make sure that the envelope
flaps are securely folded down,
and that there is no air inside
the envelopes.
and that there is no air inside
the envelopes.
Note
❒ Make sure that the top of the
stack is not higher than the limit
mark on the side guides.
mark on the side guides.
❒ Do not press down on the stack
of envelopes with too much
force.
force.
D
Slide the side guides against the
edge of the envelope stack.
edge of the envelope stack.
Note
❒ Make sure that the edges of en-
velopes fit under the side
guides.
guides.
E
Specify the envelope size and
feed direction using the operation
panel as follows.
A Press {
feed direction using the operation
panel as follows.
A Press {
Menu
}
The following message appears.
Main Menu: j
Job Control l
B Press {
Enter
}.
The following message appears.
Job Control: j
1.Paper Input l
C Press {
Enter
}.
D Press {U}{T} until the follow-
ing message appears.
Paper Input: j
3.Paper Size l
E Press {
Enter
}.
The following message appears.
Paper Size: j
1.Bypass Tray l
F Press {
Enter
}.
G Using {U}{T}, select the enve-
lope type you want to use.
Reference
For informations on types of
envelopes you can select, see
P.65 “Paper and Other Media
Supported by Your Printer”.
envelopes you can select, see
P.65 “Paper and Other Media
Supported by Your Printer”.
H Press {
Enter
}.
I After the panel display chang-
es, press
{
On Line
}.
The panel display returns to the
ready condition as follows:
ready condition as follows:
Ready
F
Start the print operation with
your computer.
your computer.
Type 1 printer: loading envelopes into
the envelope feeder
the envelope feeder
Note
❒ Please refer to the inside of the
front cover of this manual to con-
TS3Y311E