Ricoh AP400 安装指南
1394 Interface Unit Type 4510
31
2
1394 Interface Unit Type 4510
Note
❒ Depending on the model you use,
the Network Interface Board , the
1394 Interface Unit, 802.11b Inter-
face Unit, and the Bluetooth Inter-
face Unit cannot be installed to the
printer at the same time. For more
information, see p.17 “Installing
Options”.
1394 Interface Unit, 802.11b Inter-
face Unit, and the Bluetooth Inter-
face Unit cannot be installed to the
printer at the same time. For more
information, see p.17 “Installing
Options”.
Important
❒ Printing using “1394/SCSI Print-
er” (Windows 2000) device and
“IEEE 1394 and SCSI printers”
(Windows XP/Server 2003) with
the optional 1394 interface unit is
possible under Windows 2000 and
Windows XP/Server 2003. Print-
ing with IP over 1394 is possible
under Windows Me and Windows
XP/Server 2003.
“IEEE 1394 and SCSI printers”
(Windows XP/Server 2003) with
the optional 1394 interface unit is
possible under Windows 2000 and
Windows XP/Server 2003. Print-
ing with IP over 1394 is possible
under Windows Me and Windows
XP/Server 2003.
❒ With Windows 2000, the 1394 In-
terface Unit can only be used with
Service Pack 1 or later. If the Ser-
vice Pack is not installed, the con-
nectable SCSI print device in a
1394 bus is only one, and the client
cannot install the printer driver
without using an account with Ad-
ministrators permission.
Service Pack 1 or later. If the Ser-
vice Pack is not installed, the con-
nectable SCSI print device in a
1394 bus is only one, and the client
cannot install the printer driver
without using an account with Ad-
ministrators permission.
❒ Before touching the 1394 Interface
Unit, touch something metal to
discharge any static electricity.
Static electricity can damage the
1394 Interface Unit.
discharge any static electricity.
Static electricity can damage the
1394 Interface Unit.
❒ Do not subject the 1394 interface
unit to physical shocks.
❒ Unplug all the interface cables
from the printer before installa-
tion. If you take out the controller
board with cables plugged in, the
1394 Interface Unit might be dam-
aged.
tion. If you take out the controller
board with cables plugged in, the
1394 Interface Unit might be dam-
aged.
❒ Use the 1394 interface cable that
comes with this printer.
❒ Do not plug or unplug the 1394 in-
terface cable while installing the
printer driver.
printer driver.
Note
❒ Refer to the manual provided with
the 1394 Interface Unit for further
details.
details.
Installing the 1394 Interface
Unit
Unit
AAAA
Check the contents of the box for
the following items:
• 1394 Interface Unit
• 1394 Interface Cable (6 pins x 4
the following items:
• 1394 Interface Unit
• 1394 Interface Cable (6 pins x 4
pins)
• 1394 Interface Cable (6 pins x 6
pins)
• Installation Guide
• Notes to Users
• Notes to Users
BBBB
Confirm that the followings are
true:
• The power switch is turned off.
• The interface cable is un-
true:
• The power switch is turned off.
• The interface cable is un-
plugged from the printer.
CCCC
Remove the two screws holding
the controller board in place.
the controller board in place.
Note
❒ Use a coin or similar object if the
screws do not turn easily.