Ricoh AP400 安装指南
Installing Options
30
2
Connecting the Network
Interface Cable to the Network
Interface Cable to the Network
AAAA
Turn off the power switch.
BBBB
Loop the network interface cable
and attach the ferrite core.
and attach the ferrite core.
Note
❒ The network interface cable
loop should be about 15 cm (6")
(
(
A) from the end of the cable
(on the end closet to the print-
er). The ferrite core at the end of
the cable should be a ring type
ferrite core.
er). The ferrite core at the end of
the cable should be a ring type
ferrite core.
CCCC
Attach the network interface ca-
ble to the jack on the Network In-
terface Unit.
ble to the jack on the Network In-
terface Unit.
DDDD
Connect the other end of the net-
work interface cable to the net-
work.
work interface cable to the net-
work.
EEEE
Turn on the power switch.
Check the LEDs on the ethernet
port.
Check the LEDs on the ethernet
port.
1 is lit when the printer is securely
connected to the network.
2 is lit when 100BASE-TX is in use
and not lit when 10BASE-T is in
use.
connected to the network.
2 is lit when 100BASE-TX is in use
and not lit when 10BASE-T is in
use.
ZDDP320E
ZKEX291E
ZGDH260J
1
2