Novation remote sl 用户指南
48
In Flip mode, the encoders can be used to control send panning of the currently selected send bank by pressing either the
2nd or 3rd ROW-SELECT button on the left-hand side of the ReMOTE SL:
2nd or 3rd ROW-SELECT button on the left-hand side of the ReMOTE SL:
2nd ROW-SELECT button: Encoders control panning of a mono send, or left-channel panning of a stereo send.
3rd ROW-SELECT button: Encoders control right-channel panning of a stereo send.
To exit Flip mode and return to Track mode, press the 4th ROW-SELECT button on the left-hand side of the ReMOTE SL
once more.
once more.
Controlling Plug-ins – Insert Mode
Insert mode allows control over plug-ins in Pro Tools. To put the ReMOTE SL into Insert mode, press the 1st ROW-SELECT
button on the left-hand side (next to the upper left-hand row of buttons). The 1st ROW-SELECT LED will light when the
ReMOTE SL is in Insert mode. You can then use the ReMOTE SL to control plug-ins as follows:
Insert mode allows control over plug-ins in Pro Tools. To put the ReMOTE SL into Insert mode, press the 1st ROW-SELECT
button on the left-hand side (next to the upper left-hand row of buttons). The 1st ROW-SELECT LED will light when the
ReMOTE SL is in Insert mode. You can then use the ReMOTE SL to control plug-ins as follows:
There are in fact two modes for controlling plug-ins – ‘Insert Select mode’ and ‘Insert Edit mode’. You can switch between
these two modes using the INSERT EDIT/SELECT TOGGLE button. In Insert Select mode you can select and load plug-ins
into insert slots and in Insert Edit mode you can edit plug-in parameters.
these two modes using the INSERT EDIT/SELECT TOGGLE button. In Insert Select mode you can select and load plug-ins
into insert slots and in Insert Edit mode you can edit plug-in parameters.
In Insert mode, the left-hand ReMOTE SL display can show a maximum of 4 insert slots or 8 plug-in parameters at one
time. Encoders 1-4 and buttons 1-4 (above the encoders) correspond to these insert slots/parameters. The PAGE buttons
can be used to scroll through pages of insert slots or plug-in parameters.
time. Encoders 1-4 and buttons 1-4 (above the encoders) correspond to these insert slots/parameters. The PAGE buttons
can be used to scroll through pages of insert slots or plug-in parameters.
In Insert Select mode, the left-hand ReMOTE SL display shows the insert slots of the currently selected track. There are 5
insert slots for each track in Pro Tools but only 4 can be displayed at one time on the ReMOTE SL so use the PAGE buttons
to access the 5th insert slot. The currently displayed insert slots (‘Insert 1-4’ or ‘Insert 5’) and the name of the selected
track are shown on the top line and the plug-in names are shown on the bottom line:
insert slots for each track in Pro Tools but only 4 can be displayed at one time on the ReMOTE SL so use the PAGE buttons
to access the 5th insert slot. The currently displayed insert slots (‘Insert 1-4’ or ‘Insert 5’) and the name of the selected
track are shown on the top line and the plug-in names are shown on the bottom line:
To edit the inserts on a different track, press and hold the INSERT (LEFT-HAND SCROLL UP) button. You will see
abbreviated track names on the left-hand ReMOTE SL display (as in Track mode). Press the button in the upper left-hand
row on the ReMOTE SL that corresponds to the track whose inserts you want to edit and THEN release the INSERT button.
You may need to press the BANK UP/DOWN buttons whilst INSERT is held down to scroll through banks of tracks and find
the track you want. You can also select a track for insert editing in this way when the ReMOTE SL is in Track mode or Flip
mode - the ReMOTE SL will then automatically switch to Insert mode.
abbreviated track names on the left-hand ReMOTE SL display (as in Track mode). Press the button in the upper left-hand
row on the ReMOTE SL that corresponds to the track whose inserts you want to edit and THEN release the INSERT button.
You may need to press the BANK UP/DOWN buttons whilst INSERT is held down to scroll through banks of tracks and find
the track you want. You can also select a track for insert editing in this way when the ReMOTE SL is in Track mode or Flip
mode - the ReMOTE SL will then automatically switch to Insert mode.