Novation remote sl 用户指南
50
10.4 DIGITAL PERFORMER
Setup
1. Run the latest ReMOTE SL installer. When given the option to update the unit, select to ‘Install Digital Performer
HUI Support’.
Setup
1. Run the latest ReMOTE SL installer. When given the option to update the unit, select to ‘Install Digital Performer
HUI Support’.
2. On the ReMOTE SL, press the GLOBAL menu button to enter the Global menu, scroll up to the 3rd page and set the HUI
parameter to ‘ON’, then press WRITE to save the setting and the PLAY mode button to return to Play mode.
parameter to ‘ON’, then press WRITE to save the setting and the PLAY mode button to return to Play mode.
3. Make sure the ReMOTE SL is connected to your computer and switched on, then launch Digital Performer.
4. Select ‘Bundles’ from the ‘Studio’ menu in Digital Performer and select the ‘MIDI Devices’ tab in the Bundles window.
5. Add two new devices using the ‘Add’ button at the bottom of the window and rename them ‘ReMOTE SL Port 1’ and
‘ReMOTE SL Port 2’ respectively. Set the input and output for these devices (by clicking on the boxes) as shown in the
following screenshot:
‘ReMOTE SL Port 2’ respectively. Set the input and output for these devices (by clicking on the boxes) as shown in the
following screenshot:
6. Select ‘Control Surface Setup...’ from the ‘Setup’ menu in Digital Performer. In the setup window, add a control surface
using the ‘+’ button then select ‘HUI’ from the ‘Driver’ drop-down menu and ‘ReMOTE SL Port 2-1’ from the ‘MIDI’ drop-down
menu. Make sure ‘Listen to control surfaces in background’ is enabled, then click ‘OK’.
using the ‘+’ button then select ‘HUI’ from the ‘Driver’ drop-down menu and ‘ReMOTE SL Port 2-1’ from the ‘MIDI’ drop-down
menu. Make sure ‘Listen to control surfaces in background’ is enabled, then click ‘OK’.