Nortel 4526T-PWR 用户指南
62
Chapter 2 Configuring Quality of Service (QoS) with the CLI
The syntax for the
no qos classifier-block
command is
no qos classifier-block
<1-55000>
Substitute
<1-55000>
above with the ID of the classifier block to be deleted.
The
no qos classifier-block
command is executed in the Global
Configuration command mode.
Configuring QoS system-element
qos system-element command
The
qos system-element
command configures the system classifier
element parameters that may be used in QoS policies.
The syntax for the
qos system element
command is
qos system-element
<1-55000>
[known-mcast | unknown-mcast
| unknown-ucast] [pattern-ip-version <ipv4 | ipv6 | non-ip>]
[pattern-format <tagged | untagged>] [pattern-data
<WORD>
pattern-mask <WORD>] [session-id <1-4294967295>]
outlines the parameters for
this command.
qos system-element parameters
Parameter
Description
<1-55000>
System classifier element entry id; range is 1
to 55000.
to 55000.
known-mcast
Filter on known multicast destination address.
unknown-mcast
Filter on unknown multicast destination address.
unknown-ucast
Filter on unknown unicast destination address.
pattern-ip-version <ipv4 | ipv6
| non-ip>
| non-ip>
Specify the IP version of the pattern data mask.
Valid values are: ipv4, ipv6, or non-ip.
Valid values are: ipv4, ipv6, or non-ip.
pattern-format <tagged |
untagged>
untagged>
Specify the format of the pattern data mask.
Valid values are tagged or untagged.
Valid values are tagged or untagged.
pattern-data <WORD>
Byte pattern data to filter on.
ATTENTION
The format of the WORD string is in the
form of XX:XX:XX:....:XX.
form of XX:XX:XX:....:XX.
session-id <1-4294967295>
Specify the session ID.
Nortel Ethernet Routing Switch 4500 Series
Configuration — Quality of Service
NN47205-504 (322816-
B
)
03.01
Standard
5.1
23 November 2007
Copyright © 2007, Nortel Networks
.