Nortel 4526T-PWR 用户指南
Configuring QoS Interface Shaper
69
Configuring QoS Interface Shaper
qos if-shaper command
The
qos if-shaper
command configures the interface shaping
parameters for a set of ports.
The syntax for the
qos if-shaper
command is
qos if-shaper [name
<WORD>] [shape-rate
<64-32000000>]
[burst-size <burst-size>] [max-burst-rate
<64-4294967295>]
[max-burst-duration
<1-4294967295>]
outlines the parameters for this
command.
qos if-shaper parameters
Parameter
Description
<WORD>
Specify name for if-shaper; maximum is 16
alphanumeric characters.
alphanumeric characters.
shape-rate
<64-32000000>
<64-32000000>
Shaping rate in kilobits/sec; range is
64-32000000 kilobits/sec.
64-32000000 kilobits/sec.
burst-size <burst-size>
Committeed burst size in Kilobytes. The value
range is: 4, 8, 16, 32, 64, 128, 256, 512, 1024,
2048, 4096, 8192, 16384.
range is: 4, 8, 16, 32, 64, 128, 256, 512, 1024,
2048, 4096, 8192, 16384.
max-burst-rate
<64-4294967295>
<64-4294967295>
Maximum burst rate in kilobits/sec; range is
64-4294967295Kbits/sec.
64-4294967295Kbits/sec.
max-burst-duration
<1-4294967295>
<1-4294967295>
Maximum burst duration in milliseconds; range
is 1 to 4294967295 ms.
is 1 to 4294967295 ms.
The
qos if-shaper
command is executed in the Interface Configuration
mode.
no qos if-shaper command
The
no qos if-shaper
command disables the interface shaping for a
set of ports.
The syntax for the
no qos if-shaper
command is
no qos if-shaper [port <portlist>]
Substitute
<portlist>
above with the ports on which to disable shaping.
The
no qos if-shaper
command is executed in the Interface
Configuration mode.
Nortel Ethernet Routing Switch 4500 Series
Configuration — Quality of Service
NN47205-504 (322816-
B
)
03.01
Standard
5.1
23 November 2007
Copyright © 2007, Nortel Networks
.