Nortel 4526T-PWR 用户指南

Chapter 2 Configuring Quality of Service (QoS) with the CLI

Configuring QoS Policies

QoS policies can be configured using the following CLI commands.

qos policy command

The

qos policy

command creates a QoS policy.

The syntax for the

qos policy

command is

qos policy <1-55000>

[enable | disable] [name

<WORD>]

[port <port_list>] if-group <WORD>

clfr-type {classifier

| block} {clfr-id

<1-55000>

| clfr-name

<WORD>}

{{in-profile-action

<1-55000> | in-profile-action-name

<WORD>} | meter

<1-55000>

| meter-name

<WORD>}

precedence <1-8>

[track-statistics

<individual |

aggregate>]} [session-id <1-4294967295>]

"qos policy parameters" (page 70)

describes the parameters for this

command.

qos policy parameters

Parameter

Description

<1-55000>

Enter an integer to specify the QoS policy;
range is 1 to 55000.

[enable | disable]

Enable or disable the QoS policy. Default is
disable.

name <WORD>

Enter the name for the policy; maximum is 16
alphanumeric characters.

port <port_list>

The ports to which to directly apply this policy.

if-group <WORD>

Enter the interface group name to which this
policy applies; maximum number of characters
is 32 US-ASCII.The group name must begin
with a letter within the range a..z or A..Z.

clfr-type <classifier | block>

Specify the classifier type; classifier or block.

clfr-id <1-55000>

Specify the classifier ID; range is 1 to 55000.

clfr-name <WORD>

Specify the classifier name or classifier block
name; maximum is 16 alphanumeric characters.

in-profile-action <1-55000>

Enter the action ID for in-profile traffic; range
is 1 to 55000.

in-profile-action-name
<WORD>

Enter the action name for in-profile traffic;
maximum is 16 alphanumeric characters.

meter <1-55000>

Enter meter ID associated with this policy;
range is 1 to 55000.

Nortel Ethernet Routing Switch 4500 Series

Configuration — Quality of Service

NN47205-504 (322816-

)

03.01

Standard

5.1

23 November 2007