Nortel 4526T-PWR 用户指南
Configuring an Interface Group
93
Displaying Interface ID Table
To display the Interface ID Table:
Step
Action
1
Open the Interface Config screen by selecting Applications > QoS
> QoS Advanced > Devices > Interface Config from the menu.
This screen is illustrated in
> QoS Advanced > Devices > Interface Config from the menu.
This screen is illustrated in
.
2
Click Display Interface ID Table.
The Interface ID screen opens (
The table displays all interfaces and the interface group (role
combination) to which it belongs. If an interface does not belong to
an interface group (role combination), it does not display in the table.
combination) to which it belongs. If an interface does not belong to
an interface group (role combination), it does not display in the table.
The table displays a mapping of each interface to its interface group.
Interface ID screen
—End—
Adding or Removing Interface Group Members
To select or de-select ports as members of an existing interface group
perform these tasks:
perform these tasks:
Nortel Ethernet Routing Switch 4500 Series
Configuration — Quality of Service
NN47205-504 (322816-
B
)
03.01
Standard
5.1
23 November 2007
Copyright © 2007, Nortel Networks
.