Nortel 4526T-PWR 用户指南
Configuring 802.1p priority queue assignment
95
—End—
Deleting an Interface Group
To delete an Interface Group configuration:
Step
Action
1
Open the Interface Config screen by selecting Applications > QoS
> QoS Advanced > Devices > Interface Config from the menu.
This screen is illustrated in
> QoS Advanced > Devices > Interface Config from the menu.
This screen is illustrated in
.
2
In the Interface Group Table section (
), click the Modify icon in the row of the group
to be deleted.
3
In the Ports field, de-select all ports associated with the interface
group.
group.
4
Click Submit.
5
In the Interface Group Table section, click the Delete icon in the
row of the interface group that is being removed.
row of the interface group that is being removed.
A message asks for confirmation of the requested action.
6
Click Yes.
—End—
Configuring 802.1p priority queue assignment
ATTENTION
Nortel Networks recommends using the default 802.1p assignments to ensure
end-to-end QoS connectivity.
end-to-end QoS connectivity.
802.1p user priority values can be assigned to a queue for each interface
with a specific queue set. This information is used for assigning egress
traffic to outbound queues.
with a specific queue set. This information is used for assigning egress
traffic to outbound queues.
To configure 802.1p user priority:
Step
Action
1
Open the Priority Queue Assignment screen by selecting
Applications > QoS > QoS Advanced > Devices > Priority Q
Applications > QoS > QoS Advanced > Devices > Priority Q
Nortel Ethernet Routing Switch 4500 Series
Configuration — Quality of Service
NN47205-504 (322816-
B
)
03.01
Standard
5.1
23 November 2007
Copyright © 2007, Nortel Networks
.