Nortel 1100 安装指导
108
Chapter 6 Nortel VPN Router 2700 and 2600 option installation
NN46110-317 02.01
7
Lower the new option card into the slot and gently press the connector into the
slot.
slot.
Seat the card firmly in the slot. If you do not seat the card properly, it does not
work.
work.
8
Replace the screw that secures the card to the slot (
).
9
Replace the top cover on the chassis (
a
Hold the cover at an angle, and slide it onto the chassis.
b
Insert the four screws that secure the cover to the chassis, and use a
screwdriver to tighten the screws.
screwdriver to tighten the screws.
10 To install the gateway in an equipment rack, do the following:
a
Set the VPN Router 2700 or 2600 on the rack-mount shelf in the rack.
b
Insert one of the panhead screws through the bottom hole on each side of
the shelf into the hole in the rack, and tighten the screws.
the shelf into the hole in the rack, and tighten the screws.
11 Replace the front bezel
a
Hold the bezel by the two handles, and push it onto the chassis.
b
Use a screwdriver to tighten the two screws that secure the bezel to the
chassis.
chassis.
Figure 37
Replacing the front bezel
CS260005B
Press here