Nortel 1100 安装指导

  Chapter 3  Nortel VPN Router 1700 and 1600 option installation

NN46110-317 02.01

 lists the option cards that you can install in the VPN Router 1600.

To install or replace an interface card or a hardware encryption accelerator card:

Shut down the VPN Router 1600 or 1700 using the Web GUI or the CLI, and 
then unplug it as described in 

Remove the front bezel from the chassis, and then remove the chassis from the 
equipment rack (see 

).

Remove the top cover from the chassis (see 

Attach the antistatic wrist strap that was shipped with the gateway (see 

Supported option cards for the Nortel VPN Router 1600

10/100BASE-TX Ethernet interface

1000BASE-T (1000 GT) Ethernet 

interface

1

1 The VPN Router 1600 must be running Version 5.05.330, 6.05.140 and later, 7.00.062, 7.05.100 

and later, or 7.05.300 and later..

2

56/64K CSU/DSU WAN interface

2

2 The VPN Router 1600 must be running Version 5.0 or later.

2

T1 CSU/DSU WAN interface (full-height)

2

For E1 support, you must install 

the half-height interface card.

T1/E1 CSU/DSU WAN interface 

(half-height)

2

Single V.35/X.21 WAN interface 

(full-height)

2

Single V.35/X.21 WAN interface 

(half-height)

3

3 The VPN Router 1600 must be running Version 4.80 or later.

2

 

Turn off the gateway and unplug it before you attempt to install an 
option card.