Nortel 1100 安装指导
90
Chapter 5 Nortel VPN Router 1750 option installation
NN46110-317 02.01
Installing or replacing an option card
To install or replace an option card:
1
Shut down the VPN Router 1750 using the Web GUI or the CLI, and then
unplug it as described in
unplug it as described in
2
Remove the front bezel from the chassis, and then remove the chassis from the
equipment rack (see
equipment rack (see
).
3
Remove the top cover from the chassis (see
4
Attach the antistatic wrist strap that was shipped with the VPN Router 1750
(see
(see
).
5
Locate the slot where you plan to install the new or replacement option card.
6
Remove the filler panel screw, and pull out the filler panel (or the option card
that you are replacing) from the slot
that you are replacing) from the slot
Warning:
Risk of electric shock
Turn off the VPN Router 1750 and unplug it before you attempt to install
an option card.
an option card.
Caution:
Risk of equipment damage
Do not try to install a HSSI WAN interface card or a Hardware
Accelerator card in slot 4.
Accelerator card in slot 4.