Nortel 1100 安装指导
Chapter 5 Nortel VPN Router 1750 option installation 91
Nortel VPN Router Installation — Hardware Options
Figure 29
Installing or removing an option card
7
Lower the new option card into the slot, and gently press the connector into
the slot.
the slot.
Seat the card firmly in the slot. If you do not properly seat the card, it does not
work.
work.
8
Replace the screw that secures the card to the slot (
).
9
Replace the top cover on the chassis (
a
Hold the cover at an angle, and slide it onto the chassis.
b
Insert the four screws that secure the cover to the chassis, and use a
screwdriver to tighten the screws.
screwdriver to tighten the screws.
10 To install the VPN Router 1750 in an equipment rack, do the following:
Motherboard
Option card
Filler panel screw
Rear of unit
Option card slots
CS2600017A