Nortel 4134 快速安装指南
Installing or removing an internal VPN/IPSec module
39
CAUTION
Vorsicht
Öffnen Sie nicht die Secure Router 4134 Service-Abdeckplatte,
wenn es Energie an der Maßeinheit gibt. Sie können nicht
heiß-austauschen interne Bestandteile.
wenn es Energie an der Maßeinheit gibt. Sie können nicht
heiß-austauschen interne Bestandteile.
Prerequisites
•
Ensure you have a Phillips #2 screwdriver.
•
Ensure the Secure Router 4134 has the power switched off.
•
Ensure you have an antistatic bag or sheet available for the VPN/IPSec
that you are removing.
that you are removing.
Procedure steps
Step
Action
1
Remove the two screws at the rear of the Secure Router 4134 that
hold the service access panel secure. Remove these two screws
only. See the following figure.
hold the service access panel secure. Remove these two screws
only. See the following figure.
2
Slide the access panel toward you until it is clear of the Secure
Router 4134.
Router 4134.
3
Remove the two screws that secure the VPN/IPSec module to the
Main Board (see the following figure).
Main Board (see the following figure).
Nortel Secure Router 4134
Quick Start
NN47263-100
01.01
Standard
10.0
16 July 2007
Copyright © 2007, Nortel Networks
.