Nortel 4134 快速安装指南
Establishing remote access
51
The following procedure uses Ethernet port 0/0 (on the rear of the Secure
Router 4134) for the management port. You can also use port 0/1 or port
0/2 on the front panel of the Secure Router 4134 for management purposes.
Ethernet port 0/0 is a 10/100 Base-T port. Ethernet ports 0/1 and 0/2 are
10/100/1000 Base-T ports.
Router 4134) for the management port. You can also use port 0/1 or port
0/2 on the front panel of the Secure Router 4134 for management purposes.
Ethernet port 0/0 is a 10/100 Base-T port. Ethernet ports 0/1 and 0/2 are
10/100/1000 Base-T ports.
Procedure steps
Step
Action
1
To log on to the Secure Router 4134 CLI for the first time, enter the
default user name and password:
default user name and password:
login:
admin
password:
setup
2
To access configuration mode, enter:
configure terminal
3
To select the management port for remote access, enter:
interface ethernet 0/0
4
To configure the management port for remote access, enter:
ip address <ipaddr> <netmask>
5
To exit interface configuration mode, enter:
exit
6
To configure the gateway IP address, enter:
ip route <ipaddr/netmask> <gateway ipaddr>
7
To verify the next hop connection, enter:
ping <next-hop ipaddr>
Ensure the Secure Router 4134 returns a message that indicates
the next hop IP address is active.
the next hop IP address is active.
8
To enable the Telnet server services, enter:
telnet_server
—End—
Using SSH for remote access
You can enable an SSH connection for remote access.
Procedure steps
Step
Action
1
To access configuration mode, enter:
configure terminal
Nortel Secure Router 4134
Quick Start
NN47263-100
01.01
Standard
10.0
16 July 2007
Copyright © 2007, Nortel Networks
.