Nortel 2350 参考指南

250 Configuring Wireless Parameters

NN47250-102 (320666-G Version 02.01)

To remove the mapping between the radio profile and a service profile, select the service profile in the Current Service 
Profiles list. Click Remove to move the profile name to the Available Service Profiles list. 

The Radio Selection Tab lists the radios managed by the radio profile. A radio can be managed by only one radio profile. 

To add a radio to the radio profile, select the radio in the Available Members list. Click Add to move the radio to the 
Current Members list. 

To remove a radio from the radio profile, select the radio in the Current Members list. Click Reset to Default to return 
the radio to the default radio profile. 

The Voice Configuration tab lists settings for VoIP services:

•

QoS Mode—Classification and marking of high priority traffic on the WSS and AP:

You can use an Auto-DAP profile to deploy unconfigured Distributed APs. A Distributed AP that does not have a 
configuration on a WSS can receive its configuration from the Auto-DAP profile instead. 

The Auto-DAP profile assigns a Distributed AP number and name to the AP, from among the unused valid AP numbers 
available on the switch. The Auto-DAP profile also configures the AP with the AP and radio parameter settings in the 
profile. The AP and radio parameter settings in the Auto-DAP profile are configurable. 

The Auto-DAP profile does not control SSIDs, encryption parameters, or any other parameters managed by service 
profiles. You still need to configure a service profile separately for each SSID. 

A WSS can have one Auto-DAP profile. 

Note.  If the Available Members list is empty, no APs have been configured for the 
switch yet. To configure APs , see 

 and 

. After you configure the 

APs, return to this wizard page to apply the radio profile to radios.

Note.  The SVP QoS mode also requires an ACL to mark CoS in the SVP traffic. 
The ACL is automatically configured by WLAN Management Software when you 
use the Voice Service Profile wizard with the SVP vendor option.