Nortel 2350 参考指南
256 Configuring Wireless Parameters
NN47250-102 (320666-G Version 02.01)
5
To select the radio type for a single-radio model, click the AP Radio Type box and select the
radio type from the list:
radio type from the list:
•
11b—802.11b only
•
11g—802.11b/g
6
Click Next.
7
Configure the radios:
a
a
To enable the radio, select Enabled.
b
In the Radio Profile list, select the profile to which the radio belongs. (For more
information, see
information, see
c
In the Channel Number list, select the channel number for the radio.
d
In the Transmit Power box, specify the transmit power for the radio.
e
If the AP has two radios, click Next and go to
. Otherwise, go to
8
Click Finish.
Note. The non-editable number (1 or 2) indicates the radio number on the AP.
Note. If RF Auto-Tuning for channel configuration is enabled, setting this value
has no effect. The channel number is controlled by RF Auto-Tuning.
has no effect. The channel number is controlled by RF Auto-Tuning.
Note. If RF Auto-Tuning for power configuration is enabled, setting this value has
no effect. The power level is controlled by RF Auto-Tuning.
no effect. The power level is controlled by RF Auto-Tuning.