Nortel 2350 参考指南
Optimizing a Network Plan 443
Nortel WLAN—Management Software 2300 Series Reference Guide
Optimizing a Network Plan
After you deploy a network plan to the Nortel equipment in your live network, you can optimize the plan based on RF
information from the network. The RF information can be from a site survey or from AP radios.
information from the network. The RF information can be from a site survey or from AP radios.
•
Site survey—RF measurements come from a site survey file generated by the Ekahau Site Survey™ tool. Save the
file in comma-separated values (csv) format and import the file into WLAN Management Software.
file in comma-separated values (csv) format and import the file into WLAN Management Software.
•
AP radios—RF measurements come from the APs in the network.
Optimizing your network plan improves the accuracy of the model and provides more precise results when you visualize
wireless coverage, locate users and rogue devices, and so on. You also can use optimization to find and fill coverage
holes.
wireless coverage, locate users and rogue devices, and so on. You also can use optimization to find and fill coverage
holes.
Importing RF Measurements
To import RF measurements, you need to import the measurements from AP radios in the network, from a site survey
file, or both. Then, update the RF obstacle data.
file, or both. Then, update the RF obstacle data.
Importing the Measurements
1
Select the RF Planning option in the main WLAN Management Software tool bar.
2
Display the floor plan in the Content panel.
3
Under Site Survey, click Import Measurement. The Import RF Measurements wizard is displayed.