Nortel 2350 用户指南
Getting Started 25
Nortel WLAN Management Software 2300 Series User Guide
Near the end of the installation process, the installer displays the following service ports that WLAN Management
Software Services will use:
Software Services will use:
•
443—HTTPS server port
•
162—SNMP trap receiver port
You can change one or both port numbers to prevent conflicts with other applications on the same host.
Start WMS Services
The method for starting monitoring service depends on the platform on which the service is installed:
•
Windows systems—WMS Services are started automatically when you complete installation and starts
automatically whenever you restart your system.
automatically whenever you restart your system.
To start the WMS Services on a Linux System
•
Linux systems—You can start and stop the WMS Services manually from the command line using a shell script that
is installed when you install WMS Services. You also can configure the WMS Services to start and stop
automatically.
is installed when you install WMS Services. You also can configure the WMS Services to start and stop
automatically.
To configure WMS Services as a daemon on SUSE 9.1
The recommended way to add services to a SUSE 9.1 installation is with the insserv command. Enter commands such as
the following (as root):
the following (as root):
suse# cd /etc/init.d
suse# ln -s /opt/wms/bin/wms-services wms-services
suse# insserv wms-services
suse# ln -s /opt/wms/bin/wms-services wms-services
suse# insserv wms-services
To configure WMS Services as a daemon on Red Hat WS 3
The recommended way to add services to a Red Hat WS 3 system is with the chkconfig command. Enter commands
such as the following (as root):
such as the following (as root):
Note.
Multiple applications cannot use the same UDP or TCP port on the same host. For
example, port 443 is defined by the Internet Assigned Numbers Authority (IANA) as the
well-known HTTPS port. If the host on which you install WMS Services uses its default
HTTPS port (443) and the same host also runs Microsoft Internet Information Services (IIS)
on its default HTTPS port (443), there will be a conflict over the port. WLAN Management
Software clients will not be able to communicate with WMS Services.
well-known HTTPS port. If the host on which you install WMS Services uses its default
HTTPS port (443) and the same host also runs Microsoft Internet Information Services (IIS)
on its default HTTPS port (443), there will be a conflict over the port. WLAN Management
Software clients will not be able to communicate with WMS Services.
Note.
If you plan to use the remote configuration option to configure new switches, you
must use port 443 for WMS Services. When a switch requests its configuration from WMS
Services, it sends the request to port 443.
Services, it sends the request to port 443.