Nortel 2350 用户指南

26 Getting Started

NN47250-101 (320665-G Version 02.01)

redhat# cd /etc/init.d
redhat# ln -s /opt/wms/bin/wms-services wms-services
redhat# chkconfig --add wms-services

Start WMS Services by doing one of the following:

On Linux systems, change directories to WMS_installation_directory/bin, and enter./wms.

The WMS Services Connection wizard is displayed.

Enter the IP address or fully-qualified hostname of the machine on which the service is installed. 

If WLAN Management Software Services is installed on the same machine as the one you are using to 
run WLAN Management Software client, enter 127.0.0.1 as the IP address. This is a standard IP loopback 
address. 

Specify the service port, if different from the port number in the Service Port listbox. 

Click Next to connect to the server.

If the Certificate Check dialog is displayed, click Accept.

If you left the Open Network Plan option on the WLAN Management Software Services Connection dialog selected, the 
server opens a new (blank) network plan. 

You can change the properties of WMS Services. 

Select Tools > WMS Services Setup dialog box from the WMS main tool bar. The WMS Services Setup 
wizard is displayed.

The port number used by the monitoring service must not be used by 

another application on the machine where the monitoring service is installed. If the 
port number is used by another application, change the port number on the 
monitoring service. (refer to 

.)

If a firewall is enabled on the host where you install WMS Services, WMS 

Services will not be able to communicate with WMS client or with WSSs unless the firewall 
is configured to allow through traffic for the SSL and SNMP ports (443 and 162 by default).