Nortel 450-24t 用户指南

Using the BayStack 450 10/100/1000 Series Switch

3-40

309978-D Rev 01

The EAPOL Security Configuration screen (Figure 3-16) allows you to selectively 
limit access to the switch based on an authentication mechanism that uses 
Extensible Authentication Protocol (EAP) to exchange authentication information 
between the switch and an authentication server. For more information about the 
EAPOL security feature and system requirements, see “EAPOL-Based Security” 
on page 1-21.

You will also need to set up specific user accounts on your RADIUS server:

•

User  names

•

Passwords

•

VLAN IDs

•

Port priority

You can set up these parameters directly on your RADIUS server, or by using the 
Optivity SecureLAN application.

For detailed instructions about configuring your RADIUS server, refer to your 
RADIUS server documentation; or if you are using the Optivity SecureLAN 
application, refer to Managing Network Access with Optivity SecureLAN (Part 
number 312688-A).

Choose EAPOL Security Configuration (or press e) from the Switch 
Configuration Menu to display the EAPOL Security Configuration screen.

Before you use the EAPOL Security Configuration screen, you must 

configure your Primary RADIUS Server and RADIUS Shared Secret (see 
“Console/Comm Port Configuration” on page 3-100).

Do not enable EAPOL security on the switch port that is connected to 

the RADIUS server.