Nortel 450-24t 用户指南

Using the BayStack 450 10/100/1000 Series Switch

3-42

309978-D Rev 01

Allows you to select the unit number (when stacking is configured) to view or 
configure. To view or configure another unit, type its unit number and press 
[Enter], or press the spacebar to toggle the unit numbers. If you set this field 
value to ALL, other screen field values you modify apply to all stack ports.

Default

1

Range

1,2,3,4,5,6,7,8,ALL

Allows you to select a specified unit’s (see preceding Unit field) port number 
to view or configure. To view or configure another port, type its port number 
and press [Enter], or press the spacebar to toggle the port numbers. If you 
set this field value to ALL, other screen field values you modify apply to all 
ports for the specified unit.

The ALL value is also useful when you want to apply modified field values to 
most of, but not all of, your switch’s ports. For example, if you want to apply 
modified field values to 23 of your switch’s 24 ports, it may be easier to apply 
the ALL value in the Port field, and then reconfigure the single port back to its 
original values.

Default

1

Range

1 to 28,ALL

Allows you to activate EAPOL authentication for the specified unit/port.

Default

No

Range

No,Yes

Allows you to set the EAPOL authorization status for the specified unit/port.

•

Force Authorized means the specified unit/port authorization status is 
always authorized.

•

Force Unauthorized means the specified unit/port authorization status is 
always Unauthorized.

•

Auto means the specified unit/port authorization status depends on the 
EAP authentication results.

Default

Force Authorized

Range

Force Authorized,Force Unauthorized,Auto

A read-only field that shows the current authorization status for the specified 
unit/port. This read-only field does not appear when the Unit/Port field value 
is set to ALL.

Default

Authorized

Range

Authorized,Unauthorized