Nortel 15000 参考指南
show ppp interfaces
132
308689-B Rev 00
The output includes the following information:
show ppp interfaces
The
show ppp interfaces
command displays information for each type of
interface configured on each circuit. This command allows for the following
options:
options:
The output contains the following information:
show ppp ip
The
show ppp ip
command displays information about the PPP IP configuration.
This command allows for the following option:
Name
Name of the circuit.
Line Number
Indicates the line number.
Line State
Operational state of each line in the circuit.
Protocol
Displays the protocols for the circuit.
State
Displays the state of the protocol, either enabled or
disabled. If enabled, see the show ppp alerts command
for state information.
disabled. If enabled, see the show ppp alerts command
for state information.
-name
<value>
Displays protocol information for only the named circuit.
-slot
<value>
Displays protocol information for only the specified slot.
<value>
Displays protocol information for the specified
slot/connector/channel.
slot/connector/channel.
Name
Circuit for which this command displays information.
Slot/Conn/Channel
Identifier for the slot, DS3 connector, and DS1.
Driver State
Operational state of the driver, if one is present.
Protocol
Protocol or protocols configured on this circuit.
State
Operational state of each configured protocol.
Line State
Operational state of each line in the circuit.
-name
<value>
Displays protocol information for only the named circuit.