Nortel 15000 参考指南
show ip arp
76
308689-B Rev 00
show ip arp
The
show ip arp
command displays the IP Address Resolution Protocol (ARP)
table. This table shows the mapping between the host IP address, its MAC
address, and how the IP address was learned.
address, and how the IP address was learned.
This command allows for the following command filters (flags) and filter
arguments:
arguments:
The output includes the following information about each host listed:
-
mac-address
<mac>
Displays information about the specified Layer 2 address
of the IP interface.
of the IP interface.
-interface
<name>
Displays information about the specified interface only.
-
type
<type>
Displays information indicating how the MAC address
was resolved to the IP address (either statically or
dynamically).
was resolved to the IP address (either statically or
dynamically).
-vpi/vci
<vpi/vci>
Displays information for the specified virtual path
identifier (VPI)/virtual channel identifier (VCI) only.
identifier (VPI)/virtual channel identifier (VCI) only.
<ip-address>
Displays information about the specified IP address.
IP Address
IP address of the host.
Hardware Addr
MAC address of the host.
Type
How the IP address was resolved to the MAC address:
dynamic means that ARP resolved it; static means that it
was configured through an adjacent host entry.
dynamic means that ARP resolved it; static means that it
was configured through an adjacent host entry.
Encaps
Indicates the data link encapsulation type being used for
ARP packets.
ARP packets.
Interface
Address of the IP interface through which packets reach
the host.
the host.