Nortel 15000 用户指南
![Nortel](https://files.manualsbrain.com/attachments/41d8158aa9dad39109585817452a5513bedfdded/common/fit/150/50/b0df237683acfcba182fca1886fb0237fc1e06fba6e3e77a0d64d1463e4c/brand_logo.jpeg)
Managing and Troubleshooting the Versalar Switch Router 15000
2-10
302768-C Rev 00
If you are transferring a file to a memory card, you should compact the card first
to optimize the space available for the file. See “
to optimize the space available for the file. See “
on
for instructions.
Enter the following commands to transfer a file from the BCC:
tftp get
<host_address> <remote_vol>
:
<remote_file>
[
<local_vol>
]:[
<local_file>
]
tftp put
<host_address>
<local_vol>
:
<local_file>
[
<remote_vol>
]:[
<remote_file>
]
Use
get
to transfer the file to the local Versalar 15000 and use
put
to transfer the
file to a remote node.
host_address
is the address of the host.
remote_vol
is the volume number on the remote host.
remote_file
is the name to which you want to transfer the file. If you do not enter a
destination name, the system defaults to the file name that you specify for the
source file.
source file.
local_vol
is the volume number on the local Nortel Networks router.
local_file
is the name of the file on the local router.
Note:
We recommend that you first transfer the file at the source to a new,
temporary file name if the name is the same as an existing file name at the
destination.
destination.
Caution:
The local system erases the file if you enter the address of the local
system in the
host_address
field of the
tftp
command.