Nortel 1110 用户指南
Nortel IP Audio Conference Phone 2033
Page 299 of 630
IP Phones
Description, Installation, and Operation
who moved to a new subnet by changing the TN of the IP Audio Conference
Phone 2033.
Phone 2033.
Procedure 53
Changing the TN of an existing
IP Audio Conference Phone 2033
Changing the TN of an existing
IP Audio Conference Phone 2033
1
Repower the IP Audio Conference Phone 2033.
Note: During the reboot sequence of a previously configured the
IP Audio Conference Phone 2033 displays the existing node number for
approximately five seconds.
IP Audio Conference Phone 2033 displays the existing node number for
approximately five seconds.
2
If the node password is enabled and NULL, choose one of the following:
a.
Disable the password.
b.
Set the password as non-NULL.
3
Press OK when the node number displays.
4
Enter the password at the password screen, and press OK.
A TN screen displays.
To obtain the password, enter the nodePwdShow command in Element
Manager. For further information, see Communication Server 1000
Element Manager: System Administration (553-3001-332).
Manager. For further information, see Communication Server 1000
Element Manager: System Administration (553-3001-332).
5
Select the Shift soft key labeled (>>) and press Clear to edit the TN field.
The IP Audio Conference Phone 2033 by default will place you in the units
field of the TN. You cannot use backspace to move to the loop, shelf or
card fields.
The IP Audio Conference Phone 2033 by default will place you in the units
field of the TN. You cannot use backspace to move to the loop, shelf or
card fields.
6
Enter the new TN.
End of Procedure
If
Then
the node password is enabled and
is not NULL
is not NULL
a password screen displays. Go to
step 4.
step 4.
the node password is disabled
a TN screen displays. Go to
step 5.
step 5.