Nortel 1110 用户指南
Page 300 of 630
Nortel IP Audio Conference Phone 2033
553-3001-368 Standard 26.00 August 2007
Replacing an IP Audio Conference Phone 2033
Procedure 54
Replacing an IP Audio Conference Phone 2033
Replacing an IP Audio Conference Phone 2033
1
Obtain the node and TN information of the phone you want to replace.
2
Disconnect the IP Audio Conference Phone 2033 that you want to
replace.
replace.
3
Follow either Procedure 48 on
install and configure the IP Audio Conference Phone 2033.
4
Enter the same TN and Node Number as the IP Audio Conference
Phone 2033 you replaced. The system associates the new IP Audio
Conference Phone 2033 with the existing TN.
Phone 2033 you replaced. The system associates the new IP Audio
Conference Phone 2033 with the existing TN.
End of Procedure
Removing an IP Audio Conference Phone 2033 from
service
service
Procedure 55
Removing an IP Audio Conference Phone 2033
from service
Removing an IP Audio Conference Phone 2033
from service
1
Disconnect the IP Audio Conference Phone 2033 from the network or turn
off the power.
off the power.
If the IP Audio Conference Phone 2033 was automatically configured, the
DHCP lease expires and the IP address returns to the available pool.
DHCP lease expires and the IP address returns to the available pool.
2
In LD 11, enter OUT at the TN prompt.
End of Procedure
IMPORTANT!
Two IP Phones cannot share the same TN. You must remove the
IP Audio Conference Phone 2033 that is currently using the TN.
IP Audio Conference Phone 2033 that is currently using the TN.