Nortel 1110 用户指南
Nortel IP Phone 2001
Page 71 of 630
IP Phones
Description, Installation, and Operation
Procedure 6
Changing the TN of an existing IP Phone 2001
Changing the TN of an existing IP Phone 2001
1
Repower the IP Phone 2001.
Note: During the reboot sequence of a previously configured Internet
Telephone, the IP Phone 2001 displays the existing node number for
approximately five seconds.
Telephone, the IP Phone 2001 displays the existing node number for
approximately five seconds.
2
If the node password is enabled and NULL, choose one of the following:
a.
Disable the password.
b.
Set the password as non-NULL.
3
Press OK when the node number displays.
4
Enter password at the password screen, and press OK.
A TN screen displays.
Note: To obtain the password, enter the nodePwdShow command in
Element Manager. For further information, see
Communication Server 1000 Element Manager: System
Administration (553-3001-332).
Element Manager. For further information, see
Communication Server 1000 Element Manager: System
Administration (553-3001-332).
5
Select the Clear soft key to clear the existing TN.
6
Enter the new TN.
End of Procedure
If
Then
the node password is enabled and
is not NULL
is not NULL
a password screen displays. Go to
step 4.
step 4.
the node password is disabled
a TN screen displays. Go to
step 5.
step 5.